Free resin troubleshooting guide
Fix Bubbles, Sticky Cures and Cloudy Finishes — Before They Ruin Your Next Pour
A free, printable resin troubleshooting guide that shows you why each problem happens and exactly how to fix it.
Resin is expensive, and a failed pour wastes materials and hours of work. Most problems trace back to a few causes: the ratio, the mixing, the temperature, moisture, or how thick you pour. Once you know which one is behind your problem, the fix is usually simple.
Inside the free guide
- Why bubbles stay trapped in your resin and how to get them out
- What causes sticky, tacky or soft pieces, and how to make sure your resin cures fully
- How to prevent cloudy, milky finishes, dimples and yellowing
- A printable checklist to run through before every pour
What readers say about Epoxy Resin Crafts for Beginners, written by the author
★★★★★“If you have never worked with resin, this should be your guide. It starts with what you need, setting up your space, and doing your project… This is a must have book!”
★★★★★“Very informative book. Tells you the good and bad and how to prevent it.”
★★★★★“OMG. They just keep getting better. I am enjoying this new hobby so much and these are the best books.”